Displaying Photos for the Repair of a
Genelec 1034B Triple Amplifier
This repair turned out to be replacing 1 x 5.6ohm 10 watt resistor (the start-up "Slow-Start" component)
and the associated 8 Ampere bridge rectifier on No 1 amplifier board nearest the Torroidal Transformer.
Needless to say - each and every Capacitor, Output and Driver Transistor was also cold measured too prior to
switching the whole unit back on.
If you want a closer view then click on each picture to make it larger.
You are Viewing up to 24 Photos of Set
Click on the blue number on the right to Switch to Photo Set